Sunday, January 12, 2014

78, Front Door, part 9, Painting.

In preparation for the painting and to avoid trying to mask the stone around the complex shapes, I slipped sheets of 'greaseproof' paper between the frame and the limestone. The curved 'Ovolo' moulding, to trim the head was left off and painted before it was fitted.
A coat of primer was then applied, grey behind the darker colours and white for the remainder.

With all surfaces needing at least 3 topcoats, it was a long drawn out process. The intricacy of the detail and amount of cutting in meant that I was unable to use anything larger than artists brushes for most of the work.

Difficulty in neatly priming the door with it in situ had me remove it and it spent some considerable time on stools as the details were picked out.

Unforeseen and not noticed until the second glossy topcoat, was the machining marks in the timber. Prior to painting, the wood felt silky smooth and it seemed that minimal sanding was required. Much elbow grease was expended and a lot of sandpaper was clogged, trying to rectify the problem. The above photo was taken afterwards, the corrugations in the light green, closer to and within the frieze still bearing testament to my ignorance.

In an effort to simplify the painting, I had one trial of the use of masking tape. For this purpose I purchased the best quality tape available from the local 'Bunnings' store, but as expected, from all my previous experiences with the stuff, it was a waste of effort. Despite the most meticulous care in positioning it and ensuring that the edges were firmly pressed down, much 'bleeding' still occurred. To increase the frustration, in a couple of spots, some of the underlying paint also lifted when the tape was removed. From then on, a steady, (of sorts!), hand was used for all the 'cutting in'.

The finished product, it was a huge relief to complete the last brushstrokes!.
I am very happy with the result and are in 2 minds as to whether to highlight some more detail. I had intentions of colouring the rings on the columns red, but fear it may be too much. For now I'll just leave it as is until I have completed and installed the leadlights.
The colours used are; Deep Bronze Green, Deep Indian Red, Eau De Nil, (Light Green) and Eggshell, a Haymes colour.